01
Paste what your switches printed
show cdp neighbors, pasted as it came off the terminal, becomes the
drawing: every device, every cable and every port name.
Seventeen things Drawbridge does for a network drawing, each in a short clip. Each clip is the editor itself, recorded while it runs: nothing mocked up, nothing sped up. They play as you reach them, without sound; under each is the version it was recorded in, a pause button and a full-screen one.
01
show cdp neighbors, pasted as it came off the terminal, becomes the
drawing: every device, every cable and every port name.
02
Move a device or a whole zone and every cable finds its own way round, hopping where two cross.
03
Pick two devices and see every equal-cost way between them, each in its own colour: in a fabric, one per spine.
04
The drawing writes the patching checklist: one row per cable, grouped by device, ticked off as each one is run.
05
Say what a link is. The type is its line, the speed is its colour, and the legend writes itself from what the page uses.
06
Drag a device into a rack and it mounts on the U you dropped it over, its cables still attached.
07
Answer a few questions and the whole SD-WAN is drawn: the hubs, the branches and every tunnel between them.
08
The drawing, the cable schedule and the inventory in one numbered PDF, previewed before it prints.
09
A zone folds to one tile that says what it holds, and its cables merge into lines that say how many.
10
One click turns the same drawing isometric, a quarter turn at a time, and it is still the drawing.
11
Four cables between the same two devices become one line marked ×4, its port names joined. The tables and the cable schedule still count all four.
12
Draw a cable dashed or dotted, then give the legend a row of your own that says what it means.
13
One switch puts the page on an engineering sheet with grid zones, numbers across and letters down, so “the core is in C3” means one place.
14
In a set of several sheets, each page can carry its own title, description and revision, or all of them can say the same.
15
Select devices and choose Connect: two get a cable at once; for more, a small window asks for a full mesh, ring, chain, star, dual star, spine–leaf or tree, suggests the spines or hubs, and counts the cables before you press Enter.
16
Each unit in a rack draws the front of its kind of hardware beside its icon and name: a patch panel’s jacks, a switch’s ports, a server’s drive bays, a PDU’s outlets.
17
A marked path can carry small arrows along its whole route, pointing its way, so it can be followed by eye after every turn.